How To Care&Maintance Your Carbon Bikes

Step1:  Care for your E-Bike battery

Learn how to make your E-bike keep cleaning, care for and store your bike, especially store battery for E-bike.

Step2:  Clean your bike drivetrain

The most important things is keeping your carbon road bike cleaning.Keeping your chain and lubed moving smoothly, ensure the life time of your chain and bike shifts as it should. Do this preferably after every ride.

You will need 1 cloth,1 bucket of water,1 specialist bike cleaning liquid,1 specialist chain & pedal lubricant,1 pump.You might also need a bike cover.

This prolongs its life. Pay particular attention to the moving parts which will rust if left dirty. Do not use soap and water as this can leave a salty residue - which causes corrosion. Just use a damp cloth or if your bike is really dirty, use specialist bike cleaning liquid.

Step3:  Keep your bike dry

Keep your bike inside if you can to avoid exposure to water which will rust moving parts, if this is not possible, consider buying a cover.

Step4: Lubricate the chain and pedals

This will keep them working properly and reduce wear and tear. Use a specialist bike lubricant which helps clean and protect.Hold a cloth underneath to catch any excess. Do this about once a week. Don't allow the lubricant to get onto the brake blocks or pedals as this will stop them working properly.

Step5: Check Tyres

Check that the tyres are fully inflated before you ride. If they feel soft, pump them up. The correct pressure is written on the side of the tyre. You can see that this tyre should have a pressure of 75 to 100 pounds per square inch. If your pump has a pressure gauge, you can pump it up to this precise figure. If it doesn't, just pump till they feel hard.